Delivery Time: 1-5 Minute

Octoplus Full 6 Months Digital License combines all available licenses together:

  • Samsung >
  • LG >
  • FRP >
  • Huawei >

General Information:

  • This license will be bound to your PC. No dongle or box is required.
  • PC can be changed once per 48 hours (during the COVID-19 period)
    When things will get back to normal, this time will be increased up to 72 hours.
  • After the end of 6 Months period you will have to buy this license again.

When we confirm your payment and process your order, we will send your activation code and detailed instructions

Octoplus Samsung License:

Octoplus Samsung Digital License allows you to service Samsung cell phones.

Main Features:

  • Decode
  • Repair IMEI/Bluetooth
  • Write Firmware
  • Read/Calculate Codes
  • Read/Write Full Flash
  • Read/Write GDFS
  • Flash via USB
  • Read/Write/Repair NVM
  • Read/Write/Repair EEPROM
  • Edit Language
  • Format FS
  • Write/Repair Security
  • Write Security Backup
  • Factory Reset
  • Hard Reset
  • Read/Write/Repair TA
  • Read Info
  • Repair EFS
  • Repair WiFi Address
  • Reset Screen Lock/Pattern Lock
  • Dump RAM/NAND

Octoplus LG License:

Octoplus LG Digital License allows you to service LG phones.

Main Features:

  • Decode
  • Repair IMEI/Bluetooth
  • Write Firmware
  • Read/Calculate Codes
  • Read/Write Full Flash
  • Read/Write GDFS
  • Flash via USB
  • Read/Write/Repair NVM
  • Read/Write/Repair EEPROM
  • Edit Language
  • Format FS
  • Write/Repair Security
  • Write Security Backup
  • Factory Reset
  • Hard Reset
  • Read/Write/Repair TA
  • Read Info
  • Repair EFS
  • Repair WiFi Address
  • Reset Screen Lock/Pattern Lock
  • Dump RAM/NAND

Octoplus FRP License:

Octoplus FRP Digital License enables FRP (Google Factory Reset Protection) reset operations for Samsung, Huawei, LG, Alcatel, Motorola cell phones.

Note! Huawei phones released after March 2018 with new security (except models supported via test point) are NOT SUPPORTED.
Please follow future updates for more information.

Samsung Reset FRP operations.

1. “Reset FRP UART (UFS chips)” operation. This operation will not reset/delete device user data.

To perform “Reset FRP UART (UFS chips)” operation, do the following steps:

  1. Put the phone in Download Mode (power off the phone, press and hold "Volume-" + "Home" + "Power ON" buttons) and connect USB cable.
  2. Press “Reset FRP UART (UFS chips)” button.
  3. After Software request disconnect USB cable and connect Samsung Micro UART cable.
  4. Press and hold “Volume-“ + “Power ON” keys for 15-20 seconds, Software will automatically close wizard window and will perform the reset FRP lock.
  5. Done.

2. “Reset FRP ADB (Combination)” operation. This operation will not reset/delete device user data.

To Reset FRP lock using combination firmware, you can try to do the following:

I.

  1. Write "boot.img" partition from appropriate Combination firmware.
  2. Perform "Reset FRP ADB (Combination)" operation in the software.

II.

  1. Write full Combination firmware.
  2. Go to "Developer Options" in the phone’s Settings.
  3. Check "Enable OEM ..." option.
  4. Perform Factory Data Reset.
  5. Reflash the phone with full stock (original) firmware.

Note: "boot.img" from combination firmware can be not compatible with current phone's firmware. In that case phone will freeze on logo, or will be rebooting after writing of such boot. To restore the phone to its initial condition you need to reflash it with different full stock (original) firmware (or try to write only boot of such firmware).

Also note: You can write "boot.img" combination firmware or downgrade phone's firmware version only at your own risk!

P.S. If you cannot find combination firmware for your model in “SAMSUNG/COMBINATION" folder in Support Area, this means we don’t have these files at the moment. As soon as we get new combination firmwares, we will upload them into the Support Area.

3. “Reset FRP (Download Mode)” operation. Be careful, performing this operation will delete all user data (contacts, pictures and other) from the device!

To perform “Reset FRP (Download Mode)” operation, do the next steps:

1. Click "Reset FRP (Download Mode)" button.
2. Put phone in Download Mode (power off the phone, press and hold “Volume-“ + “Home” + “Power ON” buttons).
3. Connect the phone to PC via Micro USB cable.
4. Follow Software instructions (prompts).

Huawei Reset FRP operations.

“Reset FRP” operation. Be careful, performing this operation may reset/delete all user data (contacts, pictures and other) on some devices and firmware versions! Software will inform you about this in log, so please read and follow software instructions (prompts) carefully!

To perform “Reset FRP” operation, do the next steps:

  1. Remove SD and SIM cards from the phone.
  2. Put the phone in FastBoot Mode (power the phone OFF; press and hold “Volume-“ button, insert USB cable and wait until the phone goes in FastBoot Mode).
  3. Install necessary driver.
  4. Click "Reset FRP" button
  5. Follow software instructions (prompts).

LG Reset FRP operations.

“Reset FRP” operation. Be carefully, performing this operation may reset/delete all user data (contacts, pictures and other) on some devices and firmware versions! Software will inform you about this in log, so please read and follow software instructions (prompts) carefully!

To perform “Reset FRP” operation, do the next steps:

1. Remove SD and SIM cards from the phone.
2. Put the phone in Download Mode (power the phone OFF, press and hold "Vol+" button and connect USB cable).
3. Install necessary driver.
4. Click "Reset FRP" button.
5. Follow software instructions (prompts).

Alcatel Reset FRP operations.

“Reset FRP” operation. This operation will not reset/delete device user data.

To perform “Reset FRP” operation, do the next steps:

  1. Remove SD and SIM cards from the phone.
  2. Install necessary driver.
  3. Power the phone OFF and connect USB cable.
  4. Click "Reset FRP" button.
  5. Follow software instructions (prompts).

Motorola Reset FRP operations.

“Reset FRP” operation. This operation will not reset/delete device user data.

To perform “Reset FRP” operation, do the next steps:

  1. Put the phone in Factory Mode (power the phone OFF; press and hold "Vol-" + "Power" buttons; select “Factory Mode” in phone’s menu and confirm selection; wait until the phone powers ON).
  2. Connect USB cable.
  3. Install necessary driver.
  4. Click "Reset FRP" button.
  5. Follow software instructions (prompts).

Note: “Reset FRP” operation may not work for some devices with latest Security patch level.

Octoplus Huawei License:

Octoplus Huawei Digital License allows you to service HiSilicon and Qualcomm CPUs-based Huawei devices.

Note! Huawei phones released after March 2018 with new security (except models supported via test point) are NOT SUPPORTED.
Please follow future updates for more information.

Supported Operations and Features*:

  • Read Info
  • Decode
  • Read Bootloader Code
  • Reset FRP
  • Reset Huawei ID
  • Factory Data Reset
  • Repair IMEI A/B
  • Repair Bluetooth MAC
  • Repair Wi-Fi MAC
  • Repair S/N
  • Repair Board S/N
  • Repair Vendor Code
  • Repair Country Code

Necessary Drivers

To install necessary drivers, install “HiSuite by Huawei”.

Manufacture Mode (for HiSilicon and Qualcomm CPUs-based devices):

To enable Manufacture Mode type #*#2846579#*#, then go to Project Menu > Background Settings > USB Port Settings > Manufacture Mode.

Fastboot Mode:

To enable Fastboot Mode, do the following steps:

  1. Turn off the phone. Remove SD and SIM cards
  2. Press "Vol-" and insert USB cable
  3. Wait until phone enters into Fastboot Mode

How to connect devices:

To connect the device, do the following steps:

  1. Install necessary drivers
  2. Press “Auto detect” button

or

  1. Install necessary drivers
  2. Check “Manual select” option
  3. Select proper model from the list in the Software
  4. Press “Connect” button